Most of these types of door bottoms have a single or double kerf cut in the bottom of the door for the sweep to lock into. The snap-in door bottoms come in different designs, and sometimes even the heights of the door sweeps will vary. Determine which door bottom is needed.If door sweep fits too loosely, a spot of adhesive or caulk may be applied between the sweep and the bottom of the door.
Remove the existing door bottom most just slide off.The slide-on sweeps come in different designs. The wrap-around and L-shaped door bottoms are screwed into the inside surface of the door if you remove the screws, the door bottom comes off. Wood doors are almost always a nail or staple-on type door sweep. Peachtree bottoms are a heavy rubber that is fitted into the bottom of the door. Benchmark steel doors use a L- shaped bottom. Steel and Fiberglass doors normally use the slide-on or snap-in type. Determine Type of Door Bottom or Door Sweep This type of door bottom is generally found on wood doors. Easy to install and adjust, but doesn't always work well The Staple-On Requires removing the door from the frame. The L-Shape Screws to the inside surface of the door. The Wrap-Around Easy to install and are adjustable but sometimes requires installing new holes in the door. They fit into a kerf cut in the bottom of the door.
The Snap-In Can normally be installed without removing the door. Slide off the old sweep, slide on the new. Read on for everything you need to know about replacing and installing door sweeps & bottoms. Door sweeps and bottoms are attached to the bottom of your door to provide a physical barrier, typically rubber, against cold that could seep through the crack between the door bottom and floor.
#CLOSET DOOR BOTTOM SWEEP HOW TO#
Replacing and Installing Door Sweeps & Bottoms How to Replace Door Sweeps and Bottoms ( VIDEO)ĭoor bottoms, also called door sweeps, are an inexpensive and effective way to increase draft protection in your home.
0 kommentar(er)
